SiteVision system requirements

Trimble SiteVision runs on Android and iOS devices, as follows:

  • any Apple device powered by iOS 13 and later, from iPhone 6s and later and iPad (2017) and later, that is supported by the Apple ARKit technology.

  • and device powered by the Android operating system version 9.0 and later, that is supported by the Google AR technology. There are over 400 devices which are Google AR Services compatible. Refer to the list that Google maintains to check if your device is supported:

    https://developers.google.com/ar/devices

For best results, Trimble recommends using a device with the highest spec possible.

Certain features, such as the 3D Scan app require a LiDAR-equipped iPhone Pro or iPad Pro.

You must have an internet connection to download models from Trimble Connect. You can operate SiteVision without an internet connection but with the following limitations:

  • You must have logged into SiteVision on the device previously.

  • To use a model (or models) from Trimble Connect, you must have already downloaded it / them from Trimble Connect while connected to the internet. You can access previously downloaded models from the Quick Access list (see Loading a model).

  • GNSS positioning may not be as accurate, as you will be operating with the satellite-delivered Trimble RTX correction stream or a local SBAS service. See Configuring the GNSS for more information.

    Make sure you adjust the GNSS Minimum High Accuracy setting; see Working with GNSS.

  • You cannot save BCF Topics, or sync measured data to Trimble Connect until you are back online.

For more information on GNSS and internet connectivity see Configuring the GNSS.

 

top