Configuring the receiver

You can configure the receivers in a number of ways. These topics describe the different configuration methods, and explains when and why each method is used.

The Siteworks or SCS900 Site Controller software is likely to be your main tool to set up and operate the receiver on a daily basis. All required field configurations are handled through the Siteworks or SCS900 software running on a controller. For more information, refer to the Trimble Siteworks or SCS900 Site Controller Software User Guides.

The external software detailed here is primarily used to update the receiver firmware and to configure upgrades or radio channels.

In this section:

Using the SCS900 Site Controller software to configure the base station, the rover, and the radios (Using the SCS900 software to configure the base station, the rover, and the radios)

Configuring the SPS Modular receiver as a rover receiver (Configuring the SPS Modular receiver as a rover receiver)

 

 

• Setting up the SPSx61 GPS receivers to provide heading

• Configuring the SPSx61 receiver as a rover receiver

• Using the SPS585 Smart Antennas to provide position, heading, and rate of turn to an iPad app

• Troubleshooting displayed data in the Pilot software

• Setting up SPS585 Smart Antennas in a Wi-Fi network to provide position, heading, and rate of turn

• Troubleshooting displayed data in the Pilot software

• Setting up a pair of SPS Modular receivers to provide heading

• Configuring the receiver using a web browser and Bluetooth wireless technology (Windows 7)

• Configuring ethernet settings

• Configuring the receiver to log data for postprocessing

• Configuring the receiver in real time

• Configuring the receiver using application files

• Configuring CenterPoint RTX

• Configuring the receiver to use specific settings when it is turned on

• Configuring the receiver as a rover

• Configuring the SPS Modular receiver as a rover receiver

• Using the SCS900 software to configure the base station, the rover, and the radios

• Using the Siteworks software to configure the base station, the rover, and the radios

• Using the Siteworks software to configure the base station, the rover, and the radios

• Configuring the SPS Modular receiver as a rover receiver

• Using the SPS585 Smart Antennas to provide position, heading, and rate of turn to an iPad app

• Configuring the SPSx61 receiver as a rover receiver

• Configuring the SPSx61 receiver as a rover receiver

• Setting up the SPSx61 GPS receivers to provide heading