Modify a Photogrammetry Point

You can modify properties for a point or observation created using photogrammetry, re-measure a photogrammetry observation for a point, or add a new photogrammetry observation to a point.

Note: To create a new point using photogrammetry measurements, see Measure Points Using Photogrammetry.

To modify properties for a photogrammetry point or observation:

Select the photogrammetry point or photogrammetry observation in the Project Explorer or Plan View. Then right-click and select Properties.
In the Properties dialog, enter new properties or modify existing properties in the editable fields as necessary.

To remove or add observations for a photogrammetry point:

Select Measure Photo Point in Photogrammetry > Data.
Click in the Point ID field. Then either type the ID for the point you want re-measure or select the point in the Project Explorer or graphic view.
To remove an observation, click the appropriate Delete icon in the Photo stations list.
A photogrammetry point requires at least two observations to be computed.
To add an observation, select the appropriate station in the Photo stations list and make the observation as described in Measure Points Using Photogrammetry.

For instructions on viewing existing photogrammetry data in Trimble Business Center, see View Photogrammetry Data. For instructions on creating a new photogrammetry point, see Measure Points Using Photogrammetry.