Run a Traverse Adjustment Report
After you adjust a traverse, generate a Traverse Adjustment Report to review adjustment statistics intended to enable you to determine the success of the adjustment.
To run a Traverse Adjustment Report:
- Click the Traverse Adjustment Report icon on the Adjust Traverse command pane toolbar.
- Select Reports > Report Option in the Quick Access Toolbar and double-click Traverse Adjustment Report in the list.
The Traverse Adjustment Report displays in a new tab.
|
Report components (for each adjusted traverse) |
|
| Summary |
Displays the traverse name and the various settings for the traverse as specified in the Adjust Traverse command pane. |
| End-Point Orientations |
Displays the start and end points for the traverse. For the start and end points, it displays the orientation method and, if applicable, the backsight/foresight points and azimuth or bearing to those points. |
| Before Adjustment |
Displays the various misclosure and precision values, along with the length of the traverse, prior to an adjustment. |
| After Angular Adjustment |
Displays the various misclosures and precision values, along with the length of the traverse, after an angular adjustment (if performed). |
| After Distance Adjustment |
Displays the various distance misclosure values after a distance adjustment (if performed). |
| Fixed points |
Displays any fixed points in the traverse. |
|
Station Adjustments |
Table showing the adjustments made to each station as a result of the traverse adjustment. |
|
|
Diagram showing the traverse in a plan view. |
To change report settings:
- Select Reports > Report Options in the Quick Access Toolbar.
