Create and Delete Work Orders
Create work orders to send to your field crews, instructing them what tasks are to be performed at a job site, as well as specifying the design, tolerances, and other settings to use. Multiple work orders can be created for a site.
Warning: Work orders are not backward compatible between SCS900 version 3.0 (v3) and versions prior to 3.0. (v2). Once you assign a work order to a v3 controller, you can no longer assign it to a v2 controller. The only exception to this is when you assign a v2 work order to the Unassigned controller. If you need to assign a v2 work order to another controller temporarily, before you assign it to another v2 controller, use the Unassigned controller.
Warning: The Underlying surface design field in not present in v3 work orders. If you assign a v2 work order to a v3 controller, you will not be able to reference an underlying surface design, if you have specified one.
Prerequisites:
- License; See the Subscription Plans page. For a license matrix by command, see the License page in the TBC Community. Also see View and manage licensed features.
- Job site
To create a work order:
- Do one of the following:
- Select Create Work Order in Construction Data > Work Orders.
- Type a unique name in the Work order name box.
Note: Different work orders assigned to different controllers can have the same name
- Select a single controller on which to access the work order in the Controllers list.
Note: Each work order can only be assigned to one controller. This is an SCS900 requirement.
- Click . The Work Order Editor displays. See Edit a Work Order.
To delete a work order:
- Right-click the work order in the Project Explorer, and select Delete Work Order from the context menu. A confirmation message appears.
- Click . The work order is removed from the Project Explorer and the data synchronization area.
