Options

A unique identifier for the map as it appears in the Selection Explorer and Properties pane.

A closed line that represents the extents of an area. Boundaries are used to define the outer edge of cut and fill volumes, areas, centers of mass, and the difference between the volumes of a specific region within your job site

A map with shading and/or a grid of measurements at an interval showing the elevation differences between two surfaces, such as an original ground surface and a design surface. Cut/fill maps are color-coded to indicate where earth needs to be cut or filled.

The amount of three-dimensional space that the cut occupies as represented in cubic units of linear measure.

The extent of the cut.

Coordinates that indicate the center of mass for the cut. A line visually connects the center of mass for the cut area and the fill area, showing the distance between them to help you visualize the hauling distance for dirt.

The amount of three-dimensional space that the fill occupies as represented in cubic units of linear measure.

The extent of the area.

Coordinates that indicate the center of mass for the fill. A line visually connects the center of mass for the cut area and the fill area, showing the distance between them to help you visualize the hauling distance for dirt

Calculates the difference between the cut and fill volumes.

Indicates the distance between the center of mass for the cut and fill. A line visually connects the center of mass for the cut area and the fill area, showing the distance between them to help you visualize the hauling distance for dirt