Add and Remove Corridor Reference Lines
When you are creating or editing a corridor, you can add or remove reference lines used in the corridor. Each of the reference lines in the corridor automatically creates a reference node in one or more cross-section templates used to define the corridor. You can base the location of a new node on a reference line node so that as the reference line offset or slope changes from one station to the next along the corridor, the offset or slope for the instruction node changes accordingly.
Note: A reference line can be any linear entity in your project.
To add reference lines to a corridor:
- In the Create Corridor pane or Edit Corridor pane, click the +/- button located in the Reference lines section. The Edit Reference Lines pane displays.
For instructions on creating or editing a corridor, see Create Corridors or Edit and Delete Corridors.
- Click in the Selected lines to add or remove field. Then, in the Plan View, select the lines you want to add as reference lines to the corridor. Click the Options button for additional selection options. Select Selection Explorer in Home > Selectionto see additional information about your selections (see Selection Explorer Options for additional instructions).
- Click the Add button. Information about the selected lines is displayed.
- When you are done selecting reference lines to add to the corridor, click Close. The number of selected reference lines is displayed in the Create Corridor pane or Edit Corridor pane.
To remove reference lines from a corridor:
- In the Create Corridor pane or Edit Corridor pane, click the +/- button located beneath the Reference lines list. The Edit Reference Lines pane displays.
- Click in the Selected lines to add or remove field. Then, in the Plan View, select the lines you want to remove from the corridor. Click the Options button for additional selection options. Select View > Selection Explorer to see additional information about your selections (see Selection Explorer Options for additional instructions).
- Click the Remove button. Information about the selected lines is displayed.
- When you are done selecting reference lines to remove from the corridor, click Close. The number of remaining reference lines is displayed in the Create Corridor pane or Edit Corridor pane.
