Menus

Navigating through the menus is done using the Up and Down buttons. Press OK to enter the line you are on. Press Back to return one level above the current level.

On the display, the first character on each line (u or >) tells you if the item is for information only or a setting you can change by pressing OK.

The radio can be set to Simplified or Expert modes. The Simplified mode gives you access to the most used information and settings, handily decluttering the menus with items you may rarely use. To switch modes, select Device Settings / UI level.

In the following table, menus in the Simplified mode are shown in bold.

First menu level

Second menu level

Notes

Information
or Setting

Simplified (S)
or Expert (E)

Saved in Profile?

Radio status

RSSI

-130 to -20 dBm depending on reception level. See Antenna matching.

Information

E

-

Antenna Quality

See Antenna matching.

Information

S/E

-

Estimated VSWR not measured!

 

Information

E

-

Duty cycle (current)

0 to 100%

Information

S/E

-

Voltage (input)

5 to 28 V. See Input voltage for external radios.

Information

S/E

-

Temperature

Internal temperature.
See Temperature range.

Information

S/E

-

Region Code

EU, USA, Canada, ROW, ROW ETSI, South Korea

Information

E

Yes

CSMA

See CSMA.

Information

E

-

Max TX power

1, 5, 10, 25, 35 W.
See Selecting the transmission power.

Information

E

-

Call sign ID

Displayed only if region code is USA. See Automatic station identification.

Information

E

-

Channel Spacing

12.5 kHz, 25 kHz.
See Setting the radio to receive any frequency.

Information

E

Yes

Wireless settings

 

Radio mode

Rover/Base, Repeater Base with one, Repeater, Rx Only. See Base/Rover or Repeater mode selection.

Setting

S/E

Yes

Frequency table Tx

List of preset transmit frequencies for each channel. See Base/Rover or Repeater mode selection.

Information

S/E

-

Frequency table Rx

List of preset receive frequencies for each channel. See Setting the transmit and receive frequencies.

Information

S/E

-

Current Channel

Current channel with transmit and receive frequencies and channel spacing. See Setting the transmit and receive frequencies.

Information

S/E

Yes

Wireless Mode

Selected wireless mode in available wireless mode list. See Wireless mode.

Setting

S/E

Yes

Tx Power

Limited to the Max TX power setting.
See Selecting the transmission power.

Setting

S/E

Yes

Auto Rover 1

See Auto Rover 1.

Setting

E

-

Auto Rover 2

See Auto Rover 2.

Setting

E

-

AR Listen Time

See AR Listen time.

Setting

E

-

Auto TX

See Auto TX.

Setting

E

-

Legacy protocol name

See Wireless mode.

Information

E

-

Channel bw (bandwidth)

12.5 kHz, 25 kHz.
See Setting the radio to receive any frequency.

Setting

E

-

Modulation

See Modulation (on-air bit rate).

Information

E

-

Air link speed

4800 bps, 8000 bps, 9600 bps, 16000 bps, 19200 bps.

Setting

E

-

FEC (Forward Error Correction)

ON, OFF. See Radio protocol (wireless mode) setting recommendations.

Setting

E

-

Error Checking

ON, OFF. See Wireless mode.

Setting

E

-

Whitening

ON, OFF. See Wireless mode.

Setting

E

-

CSMA

See CSMA.

Setting

E

-

Bluetooth

 

See Bluetooth.

Setting

S/E

Yes

Device Settings

UI level

Simplified, Expert

Setting

S/E

Yes

Serial port settings

See Serial port settings.

Setting

S/E

-

Owner name

See Owner name.

Information

E

-

Serial Number

See Serial Number.

Information

E

-

Firmware version

See Firmware version.

Information

E

-

HW version information

See HW version information.

Information

E

-

Bluetooth name

See Bluetooth name.

Information

E

-

Auto Power On

See Auto Power On.

Setting

E

Yes

Voltage

Input voltage. See Voltage.

Information

S/E

-

Operating mode

With regard to voltage.
See Operating mode.

Information

E

-

Min voltage 1

Minimum input voltage before going into energy saving mode 1.
See Min voltage 1.

Setting

E

Yes

Min voltage 2

Minimum input voltage before going into energy saving mode 2.
See Min voltage 2.

Setting

E

Yes

Max voltage

Maximum voltage before alarm sounds.
See Max voltage.

Setting

E

Yes

Display brightness

See Display settings.

Setting

S/E

Yes

Display timeout

See Display settings.

Setting

E

Yes

 

Alarm list

See Alarms.

Setting

S/E

-

Remote Control

See Remote Control.

Setting

E

-

Setting profiles

 

 

Save to profile

See Profiles.

Setting

S/E

-

Load from profile

Setting

S/E

-

Delete profile

Setting

S/E

-