Configuration

Tap / Tools to configure the following:

• Display Settings. See Using the Display Settings.

• GNSS Settings. See Configuring the GNSS.

• Configuration: tap to access the following -

  • Hardware Setup.

    • Select Handheld if you are using the Trimble HPS2 handle or the SiteVision Integrated Positioning System.

    • Select Pole if you are using your device on a pole and connecting to a Trimble Catalyst DA2 GNSS receiver.

  • Receiver Connection:

    • For the Handheld setup when connecting to a SiteVision Integrated Positioning System with a DA1 antenna using a USB cable, the DA1 antenna displays once connected.

    • For the Handheld setup when connecting to a Trimble HPS2 handle with a built-in DA2 receiver, tap the Bluetooth icon then select the DA2 GNSS receiver that matches the serial number of the HPS2 handle. The receiver name displays once paired.

    • For the Pole setup, tap the Bluetooth icon then select the DA2 GNSS receiver you want to connect to. The receiver name displays once paired.

  • Device Calibration: see Performing a device calibration (HPS2 handle and SiteVision Integrated Positioning System only).

  • Camera Offset: see Measuring camera offset values (pole mounted configuration only).

  • Pole Height. Set the height of the pole so that GNSS measurements are recorded accurately. Pole height is applicable only to GNSS measurements.

  • Units: set your preferred Distance measurement unit (Metric, International Feet, US Survey Feet).

  • Language: Select the language you want the application to run in.

  • Advanced...

    • Minimum Distance to walk: see Orientation status.

    • GNSS Minimum High Accuracy: see Working with GNSS.

    • Coordinate Order: set your preferred Coordinate Order (NEE, ENE).

    • Measured Placement: Reset or Suspend. See Placing a model: measured placement.

    • Application Settings: tap Reset All to clear changes you have made and reset the system to the default settings.

Tap About to view the Privacy Policy, Terms of Service, Version of the software, Subscription expiry date, and to access Support.

 

 top