Run a Flight Mission Adjustment Report

If an adjustment has been performed on a flight mission, you can view information about the adjustment in the adjusted mission's Flight Mission Adjustment Report. The report includes the following information (as applicable), much of it in easy-to-understand graphical views.

General project information (project name, process type and date/time, resulting file, number of cameras and images used, number of strips, flying and terrain height, average photo scale, and coordinate system)
Flight overview information (camera locations, strip definitions, and tie points)
Tie point distribution (distribution and number of images containing each point)
Camera calibration (camera data, distortion values, and image residuals)
Block adjustment results (parameters, accuracy, and mean standard deviation of translations/rotations/ground control points)
Exterior orientation (camera locations and standard deviations)
GNSS statistics (residuals and tie point locations)
Ground control points (if applicable; errors, residuals, and standard deviations)

By viewing the adjustment results, you can make some determination about the precision of the adjusted aerial survey data.

To run a Flight Mission Adjustment Report:

Use any of the following methods:

To view a Flight Mission Adjustment Report immediately after an adjustment process completes, click Yes in the report message that displays after you click the Apply Adjustment button on the Process View tab.
To view a Flight Mission Adjustment Report for a flight mission that has already been adjusted and is currently selected in the Adjust Photo Stations command pane, click the Flight Mission Adjustment Report button located in the command pane toolbar. If the flight mission has been adjusted more than once, the most recent version of the report is displayed.
To view a Flight Mission Adjustment Report other than the most recent version for a flight mission that has been adjusted more than once, locate the PDF file in your project folder and double-click to open it.
For each Flight Mission Adjustment Report created, a uniquely-named PDF file is stored in your project folder and is named as follows:
Adjustment_Report_<MissionName>_<AdjustmentDate>_<AdjustmentTime>.pdf