Edit Job Site Design Data

Review and edit your job site design data so it can be used on controllers at the job site. Prior to editing the data, make sure that you have imported any point and CAD data that you want to make available to construction crews on site. Then you can add additional points and objects to the site data as needed. If you want to use a road or surface model in your design, import any surface and alignment data that you need. In addition, you can upload job site design files, such as surface and linework to WorksOS, via the Connected Community (TCC).

Note: As you specify control points, site maps, and avoidance zones for the job site, selection sets are created for each. These sets can be used in view filters to control what you see in graphic views.

Prerequisites:

License; See the Subscription Plans page. For a license matrix by command, see the License page in the TBC Community. Also see View and manage licensed features.
Job site design

To edit job site design data:

If you have just created a design, the Job Site Design Manager command pane is displayed. Otherwise, do one of the following:
- Right-click a design in the Project Explorer, and select Job Site Design Manager from the context menu.
- Select Job Site Design Manager in Construction Data > Controllers.
The Select Design dialog displays. Select the design you want to edit, and click OK. The Job Site Design Manager command pane displays.
To add a surface, alignment, or 3D linework to your design, click Edit in the Model group The Edit Job Site Design Model dialog displays (see Add and Edit a Job Site Design Model).
To highlight the stakeout points that are included in the design data in graphic views, click Select in the Stakeout Points group.
To change the stakeout points included in the design data, click . The Add/Remove Stakeout Points dialog displays (see Add or Remove Stakeout Points).
To highlight the design map objects that are included in the design data, click Select in the Design Map group.
To change the design map objects included in the design data, click . The Add/Remove Design Map Objects dialog displays (see Add or Remove Design Map Objects).
Note: Changing a design's data can cause it to become unsynchronized with the data synchronization area, creating conflicts. An unsynchronized design is indicated by the icon in the Project Explorer. To resolve conflicts after you edit a design, click each Resolve button that is available.
To upload the job site design files into your data synchronization area for publishing to WorksOS, check the Synchronize with Business Data Center via Office Synchronizer box. See the Publish Field Data To Business Data Center help topic.
Note: Both the machine design files and the WorksOS files can be synchronized, when you run the Office Synchronizer.
Click Close. The design data is saved to the data synchronization area.