Options

Click this to open the Controller Manager.

Click this to launch the SCS Data Manager.

This shows whether the job site is linked to a project library.

Select - Click this to display the Select Project in Project Library dialog, in which you can link a job site to a project in a project library. Project libraries may be hosted in a folder or in the cloud (TCC). See Understanding the Project Library.

Rename - Click this to display the Rename Job Site dialog, where you can change the site name.

Note: Before you rename a site, read the Project and site naming section in Edit a Job Site's Name and Settings.

Units - Click this to display the Job Site Units dialog where you can review project and controller-based settings for the site. To change any of the settings, click Project Settings. If the User interval stationing format is selected, the No formating setting will be used when exporting data to SCS900.

Resolve - If there are settings conflicts, click this to display the conflict resolution dialog. The icon indicates that there is a conflict.

This shows the date and time that the site calibration in your project (either an imported site calibration file (.dc) or a site calibration that was performed in the software) was sent to the data synchronization area by assigning the current site to at least one controller.

... (Rename) - Click this to modify the default name of the file that is saved to the data synchronization area (see chart at the bottom of the page).

Resolve - If there are conflicts, click this to display the conflict resolution dialog.

Note: If you have file overwrite protection enabled for site calibrations, you will not be able to resolve a site calibration conflict.

Select - Click this to select/highlight the control points currently included in the site data.

- Click this to display the Add/Remove Control Points dialog, in which you can change the control points included in the site data.

... (Rename) - Click this to modify the default name of the file that is saved to the data synchronization area (see chart at the bottom of the page).

Resolve - If there is a conflict with the control points, click this to display the conflict resolution dialog.

Note: If you have file overwrite protection enabled for control points, you will not be able to resolve a control point conflict.

Select - Click this to select/highlight the map objects currently included in the site data.

- Click this to display the Add/Remove Site Map Objects dialog, in which you can change the site map objects included in the site data.

For details on the objects you can include, see Export GCS Machine Site Map Files.

... (Rename) - Click this to modify the default name of the file that is saved to the data synchronization area (see chart at the bottom of the page).

Resolve - If there is a conflict with the site map, click this to display the conflict resolution dialog.

Select - Click this to select/highlight the avoidance zones currently included in the site data.

- Click this to display the Add/Remove Avoidance Zones dialog, in which you can change the avoidance zones included in the site data.

For details on the objects you can include, see Export GCS Machine Avoidance Zone Files, or for details on sending avoidance zones to SCS site controllers, see Export CAD Files (.dwg/.dxf).

... (Rename) - Click this to modify the default name of the file that is saved to the data synchronization area (see chart at the bottom of the page).

Resolve - If there is a conflict with the avoidance zones, click this to display the conflict resolution dialog.

If you have specified a feature definition file (.fxl) in Project Settings, this shows the date and time that the file was sent to the data synchronization area.

To add or change the feature definition file, see Feature Code Processing Settings.

Note: If a feature definition file is included in your site data, those feature codes will be used instead of any in a feature code list (.lst) associated with the controller to which the site is assigned.

... (Rename) - Click this to modify the default name of the file that is saved to the data synchronization area (see chart at the bottom of the page).

Resolve - If there is a conflict with the feature definition files, click this to display the conflict resolution dialog.

Reassign - Click this to display the Reassign Job Site dialog, in which you can change the controllers to which the site is assigned.

File

Name

Example

[sitename]

MyJobSite.dc

[sitename] - ControlPoints

MyJobSite - ControlPoints.csv

[sitename] - SiteMap

MyJobSite - SiteMap.dxf

[sitename] - AvoidanceZones

MyJobSite - AvoidanceZones.avoid.dxf

[sitename] - FeatureCodes

MyJobSite - FeatureCodes.fxl